Configuration
4
Use the following instructions to configure the zone panel. The zone panel is factory set for a 1 Heat / 1 Cool
Conventional System with Conventional Thermostats (Heat Call on W, Cool Call on Y). If the zone panel is installed
on other systems, you will need to make configuration changes described in this section.
To start configuration:
1.
Press
SETUP
and hold for 3 seconds.
10
2.
The panel backlight will turn on and the display
will change.
3.
Change setting if needed by pressing
SELECT
.
4.
To save and advance to the next setting press
the
NEXT
button.
5.
Repeat steps 3-4 as necessary.
6.
Press
HOLD FOR BACK
for 3 seconds to go back a step.
7.
Press
HOLD FOR EXIT
for 3 seconds to exit setup menu.
