Brady PAM 3000, Operator'S Manual

Page: 64 / 87

A-6 Printer-Applicator-System PAM 3000
Solution
Check the applicator for proper
operation of its mechanics;
Check if the slide valve is closed;
Label the product manually;
(Service)
If possible place the 'lost' label onto
the product manually;
Otherwise stop print job and start
again with adapted parameters (e.g.
count)
Switch printer off and then on
If error recurs ® contact Service
Repeat the write process or reformat
the memory card.
Deactivate write protection.
Possible cause
Pad has not reached the upper position
within 2s after the lift cylinder has moved
back;
Pad has left the starting position
unauthorized;
Label has not been picked up properly by the
pad; or Label fell off the pad before it could
be placed onto the product
Hardware error
The optional memory card has encountered
a hardware error.
Refers to the optional memory card.
Write protection is activated.
Error message
Upper position
Vac. plate empty
Voltage error
Write error
Write protected
Table A-3 Error messages (continuation)