Brady PAM 3000, Operator'S Manual

Page: 59 / 87

A-1 Printer-Applicator-System PAM 3000
Appendix A - Error Messages / Problem Solution
Error Messages
The PAM-System is equipped with a comprehensive self diagnostic system which will indicate
errors in the display of the printer. Also, the operator will be informed by the LEDs whether the
fault is correctable and will, therefore, allow to continue the current print job after corrections
(e.g. "Out of paper"), or the fault may require you to cancel the current print job.
Correctable Errors
While processing a print job, an error has occured which may be corrected by the operator,
and also allows you to continue the print job after fault correction.
Display
The display shows alternately the type of fault and the total of the remaining labels of the
current print job.
LED Display
LED CAN on, LED PSE is flashing.
Function Keys
Table A-1 Function keys in mode FAULT-CORRECTABE
CAN key short pressing : Cancels the current print job,
Switch to the next job in the input buffer
longer pressing (>1s): Cancels the current print job,
Deletes the input buffer (LED CAN blinks),
Switch into ONLINE mode
PSE key Continues the current print job after error correction,
Switch into PRINT mode (LED PSE off)