8
User Manual
4.1
Removing Covers
4
3
2
1
Loosen screw (2) and remove cover (1).
Loosen screws (4) and remove cover (3).
4.2
Removing Anti-Static Brush
The anti-static brush neutralizes the buildup of excess static electricity from the printer / printhead area. If the anti-static
brush will be used, please be sure to use part number 170345 which is compatible with the cutter. This may require
replacing the anti-static brush that came with the product.
2
1
3 4
5
6
Turn lever (6) counterclockwise to open the printhead.
Remove the anti-static brush (5) from the printer by removing the screw (4) via the threaded hole (1).
Ensure that the embossing (3) un-snaps from its counterpart (2) when loosening the screw.
Close the printhead.
!
Attention!
For cutter operation there has to be mounted a tear-off plate or a dispense plate on the printer, to lead the
material through the blades of the cutter.
4
Mounting
