Page 6
To print 8 stip markers in
pairs of 2
numbered from 0000 to 0003.
1. Enter “0000" in the left hand marker display field.
2. Enter “0001" in the right hand marker display field.
3. Press the Shift-Serial key combination.
4. Enter the number “2".
5. Press the Shift-Print key combination.
6. Enter the number “2".
7. Press the Enter or Print key to start printing.
8. The result will be
4 pairs
of strip markers numbered 0000 to 0003.
Refer to Figure 1B below. In either case, due to the way the serial strip markers are incremented, you would
always enter a number 1-larger in the right side of the strip mode display.
Material Guide Pins
-(located on the under-side of the unit)
Use when removing labels or changing the label width.
Print Head Mask
Thin metal shield located between the platen and the print head assembly.
Nip & Drive Rollers
Drive roller - a rubberized roller located directly under the fixed and adjustable material guides.
Nip Rollers - small rollers located in the material guides. They exert pressure drive roller.
