Command File Interpreter White Paper
4
Command File Settings
•
Watch Directory:
Allows you to select the file analysis
directory.
•
Default Label:
Allows you to define a default label, to
be printed if no label is defined in the command file.
•
Default Output Printer:
Allows you to define a default
printer, to be used if no printer is defined in the
command file.
Other Options
•
Minimize main window -
Allows you to minimize the
main window of the labeling software when the
Command File Interpreter is launched.
•
Backup incoming files -
Usually, all command files
are deleted after printing. Activate this function to save
a backup with the extension .bak in the same
directory. For reasons of disk space, these files will be
stored for just two days.
•
Stop processing on error -
In the event of a printing
error, the Command File Interpreter will stop
processing.
•
Printers -
Allows you to select up to three printers that
can be used by the Command File Interpreter.
•
Display only selected printers -
Allows you to
display only the printers selected, if the list of printers
is very long.
•
Start -
Allows you to launch Command File
Interpreter. Once launched, the monitor window
appears.
