38
i5100 Configuration Manual
7
Test Functions
7.6
Wi-Fi Status
Access only when a Wi-Fi stick is installed and Wi-Fi is activated!
Not in the Wi-Fi operation mode "Hotspot".
The
Wi-Fi status
function prints out a list with the most important parameters of the accessible Wireless Access Points. The
printout occurs using the heat level and print speed specified in the
Setup > Printing
menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Start menu.
Select
Test > Wi-Fi status
.
The printout can be canceled with
.
Wi-Fi status
Tue Feb 13 12:47:29 2018
Brady i5100-300
Firmware V5.14 (Feb 09, 2018) - #164162032326
Channel Name/BSS ID
Signal level
Security
1
default
●●●●●
WPA2-PSK
00:24:b2:36:98:60
1
brady-dev
●●●●●
WPA2-PSK
00:24:b2:36:98:61
1
brady-guest
●●●●●
WPA2-PSK
00:24:b2:36:98:62
11
default
●○○○○
WPA2-PSK
00:24:b2:36:98:60
11
brady-dev
●○○○○
WPA2-PSK
00:24:b2:36:98:61
11
brady-guest
○○○○○
WPA2-PSK
00:24:b2:36:98:62
Figure 18 Wi-Fi status
The parameters have the following meaning :
Column
Meaning
Channel
Channel; frequency range of the Access Point
Name/BSS ID
Name of the wireless LAN
MAC address of the Access Points
Signal level
Scale of the Wi-Fi signal strength
Security
Type of data encryption
Table 23
Parameters of the
WiFi status