26
i5100 Configuration Manual
6.1.11
Display
Start menu.
Select
Setup > Display.
Parameter
Meaning
Default
Brightness
Brightness of the LCD display.
8
Time powersave
Time between the last operation and activation of energy-saving mode.
5 min
Table 18
Parameters of the
Setup > Display
menu
6.1.12
Interpreter
Start menu.
Select
Setup > Interpreter.
Parameter
Meaning
Default
Character set
Selection of the character set table for adaptation to the computer
system used. Switching the character set via software is not possible.
Characters not available in the selected character set can be accessed
using the Unicode table.
UTF-8
USB
Choosing between the programming languages JScript and ZPL for data
transfer via USB interface
JScript
RS-232
Choosing between the programming languages JScript and ZPL for data
transfer via RS-232 interface
JScript
FTP
Choosing between the programming languages JScript and ZPL for data
transfer via FTP
JScript
LPD
Choosing between the programming languages JScript and ZPL for
printing with LPD
JScript
RawIP
Choosing between the programming languages JScript and ZPL for
printing with RawIP
JScript
Bluetooth
Choosing between the programming languages JScript and ZPL for
data transfer via Bluetooth
only with Bluetooth adapter installed
JScript
Table 19
Parameters of the
Setup > Interpreter
menu
6.1.13
ZPL
Start menu.
Select
Setup > ZPL.
Parameter
Meaning
Default
> Printing width
Setting the print width for ZPL programming
100.0 mm
> Label length
Setting the label length for ZPL programming
150.0 mm
Table 20
Parameters of the
Setup > ZPL
menu
6
Configuration