English
Setting Up the Printer
3
6/7/13
BMP
®
41 Quick Start Guide
Setting Up the Printer
Power is supplied to the BMP
®
41 Label Printer through a BMP41-BP NiMH battery
pack, or through an AC power adapter.
Do not disassemble or mistreat the battery pack.
The Battery Pack should only be used in the BMP
®
41 Label Printer.
Do not use any other rechargeable battery pack other than the BMP-UBP in the
BMP
®
41 Label Printer.
Do not allow metal or other conductive materials to touch the battery terminals.
Store your battery pack only in a cool, dry place.
The battery pack must be recycled or disposed of properly according to federal, state,
and municipal regulations.
Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
Do not short-circuit a cell or a battery.
Do not use any charger other than that specifically provided for use with the equipment.
Do not use any cell or battery which is not designed for use with the equipment.
Do not mix cells of different manufacture, capacity, size or type within a device.
Secondary cells and batteries need to be charged before use. Always use the correct
charger and refer to the manufacturer's instructions or equipment manual for proper
charging instructions.