BPP11 User Manual
21
Dump Mode
The printer enters dump mode after printing the printer configuration. In the dump mode, all
characters are printed in 2 columns as shown. The ASCII characters are received from your
system and right side data shows the corresponding hexadecimal value of the characters. It
allows users or engineers to verify and debug the program.
Notes: •
1. Dump mode requires 4” wide paper width.
• 2. Turn off / on the power to resume printer for normal printing.
• 3. Press FEED button to go back to the previous menu.
Printer Initialization
Printer initialization is used to clear DRAM and restore printer settings to defaults. The only
exception is ribbon sensitivity, which will not be restored to default.
To activate Printer initialization:
1. Turn off the power switch.
2. Hold the
Feed
button down, then turn the power switch
ON
.
3. Release the button when the LED turns
green
after 5 amber blinks.
(Any time during the
5 blinks).
The LED color changes as follows:
•
Amber
Æ
Red
(5 blinks)
Æ
Amber
(5 blinks)
Æ
Green
(5 blinks)
Æ
Green/Amber
(5 blinks)
Æ
Red/Amber
(5 blinks)
Æ
Solid Green
Hex decimal data related to
left column of ASCII data
ASCII Data
Summary of Contents for BBP11-34L
Page 1: ...Thermal Transfer Printer User Guide BBP11 34L Ed 08 09...
Page 14: ...10 BPP11 User Manual Ribbon Loading Path...
Page 32: ......
