background image

5

Installation 

Bradley TouchTime

®

 Individual Built-In Wall Shower with Concealed Supplies

Bradley • 

215-1855 Rev. A; ECN 17-03-011 

8/23/2017

TouchTime

®

 Valve Parts List

For service please see service guide 215-1369-38 for solenoid valve and TouchTime information .

Cleaning and Maintenance for Stainless Steel

Material Description:

 Stainless steel is extremely durable, and maintenance is simple and inexpensive . Proper care, particularly 

under corrosive conditions, is essential . Always start with the simplest solution and work your way toward the more complicated .

Routine cleaning:

 Daily or as often as needed use a solution of warm water and soap, detergent, or ammonia . Apply the 

cleaning solution per the manufacturer's instructions and always use a soft cloth or sponge to avoid damaging the finish .

Stubborn Stains:

 To remove stains from stainless steel use a stainless steel cleaner and polish such as Ball

®

 stainless steel 

cleaner or a soft abrasive . Always follow the manufacturer's instructions and apply in the same direction as the polish lines .

NOTICE!  Never use ordinary steel wool or steel brushes on stainless steel. Always use stainless steel wool or 

stainless steel brushes.

Fingerprints and Smears:

 To remove fingerprints or smears use a high quality stainless steel cleaner and polish in accordance 

with the manufacturer's instructions . Many of these products leave a protective coating that helps prevent future smears and 
fingerprints .

Grease and Oil:

 To remove grease and oil use a quality commercial detergent or caustic cleaner . Apply in accordance to the 

manufacturer's instructions and in the direction of the polish lines .

Precautions:

 Avoid prolonged contact with chlorides (bleaches, salts), bromides (sanitizing agents), thiocyanates (pesticides, 

photography chemicals, and some foods), and iodides on stainless steel equipment, especially if acid conditions exist .

NOTICE!  Do not permit salty solutions to evaporate and dry on stainless steel.

The appearance of rust streaks on stainless steel leads to the belief that the stainless steel is rusting . Look for the actual source 
of the rust in some iron or steel particles which may be touching, but not actually a part of the stainless steel structure .

NOTICE!  Strongly acidic or caustic cleaners may attack the steel causing a reddish film to appear. The use of these 

cleaners should be avoided.

Brand Names

Use of brand names is intended only to indicate a type of cleaner . This does not constitute an endorsement, nor does the 
omission of any brand name cleaner imply inadequacy . Many products named are regional in distribution, and can be found in 
local supermarkets, department and hardware stores, or through your cleaning service . It is emphasized that all products should 
be used in strict accordance with package instructions .

Complete Installation

4

A

B

C

D

Secure the showerhead to the 1/4"-20 wall 
anchors (supplied by installer) using the screws 
provided .

Secure the pushbutton to the #10 wall anchors 
(supplied by installer) .

Turn on the water supply to the 1C TouchTIme 
shower and check for leaking .

Turn on the power to the control module and 
press the pushbutton several times to purge air 
from the lines .

Summary of Contents for TouchTime 1C






Reviews: