3
Installation
Bradley TouchTime
®
Individual Built-In Wall Shower with Concealed Supplies
Bradley •
215-1855 Rev. A; ECN 17-03-011
8/23/2017
A
Rough-in 1/2" tempered
water supply piping
to the valve assembly
as required for your
installation .
B
Rough-in wall openings
for the showerhead and
pushbutton as required
for your installation .
C
Install two #10 wall
anchors (supplied
by installer) to
secure pushbutton
assembly .
2-3/4"
(70mm)
Need to secure
valve assembly to
structure (hardware
by installer) .
2-1/4"
(57mm)
4-1/4"
(108mm)
2-3/8" (60mm)
1/2" (13mm)
1-1/2" (38mm)
3" (76mm)
5-7/8"
(149mm)
5/16" Plastic
Tubing
Elbow, 1/4 NPTM x 5/16 Tube
1/2" IPS Piping
(supplied by installer)
(2) #10-24 Screw
(supplied by
Bradley) and
(2)#10 wall
anchors (supplied
by installer)
Reducer
Showerhead
Escutcheon
(4) 1/4"-20
Anchors
(supplied by
installer) and
(4) screws
(supplied by
Bradley)
Refer to recommended shower heights shown above.
WARNING The 1C TouchTime shower must be connected with a 120VAC/12V DC plug in adapter. Not using
the provided adapter can cause personal injury and will result in damage to the electronics.
Rough-In
1
Mechanical pushbutton shown, piezo switch similar.
