Installation
TDB3104, WF3204
Bradley
• 215-1332 Rev. V; ECN 12-00-004
1/15/2013
17
Sprayheads — Standard w/Neoprene Spray Ring Grommet
Repair kit does not include sprayhead
grommet. Order as a separate item.
1
2
3
4
5
9
6
8
7
10
Parts List
Item
Part No.
Description
Sprayhead
Assembly
S05-054B
Repair
Kit
S45-051
Qty
1
125-001DE
Neoprene Washer - Top
1
1
2
139-031
Sprayhead Manifold
1
—
3
124-001AL
Washer
3
4
4
160-211
Carriage Bolt
3
4
5
115-061
Sprayhead - Top
1
—
6
116-008
Sprayhead - Bottom
1
—
7
124-001AT
Washer
3
4
8
161-025
Nut
3
4
9
124-020D
Sprayhead Grommet - Semi-Circle
1
—
10
125-001DF
Neoprene Washer - Bottom
1
1
Sprayhead Service Suggestions
Problem
Possible Cause
Solution
Water splashes over the
rim of the bowl.
Foreign matter has reduced
the size of the sprayhead slots,
causing greater pressure at the
open slots.
Clean the sprayhead:
1. Disassemble the sprayhead and dislodge any dirt, lime build-
up and foreign debris with a wire brush.
2. Sprayheads with rubber grommet spray rings may be cleaned
by rubbing a coin over the grommet.
3. Throttle down the volume control (water spray should strike
the bowl without splashing outside of the bowl).
Water flow diminishes
from the sprayhead.
Strainer portion of the stop-
strainer-check valve is plugged.
Remove and clean the strainer screen from the stop-strainer-check
valve.
The sprayhead shown above includes a perforated neoprene spray ring grommet that is self-cleaning. The
water pressure flexes the spray holes which slows accumulation of foreign matter and tends to “break loose”
any such deposits that may have accumulated.
