6
S19-280D, -280W, -290D, -290W, 274HDB, 274HWB, 274JDB, 274JWB
Installation
12/7/2017
Bradley •
215-1740 Rev. C; ECN 15-05-042
Installation
27
"
(686mm)
15
¹⁄₈
"
(384mm)
Ref .
2
¹⁄₈
"
(54mm)
Min .
19
¼"
(489mm)
Ref .
3¾"
(95mm)
Ref .
2½"
(64mm)
Min .
Ø
³⁄₁₆
"
1¼"
(32mm)
Ø
⁷⁄₈
"
¼"
(6mm)
Deck Mounting Pattern
Drill (3) holes as shown .
A
Deck
B
P.O. BO
X 309,
MENOMONEE
FALLS
, WI 53052-0309 US
A
TEL:
1-800-BRADLEY
FAX:
(262-251-5817
)
http://www
.bradle
ycorp.com
114-05
1
D
To
Wall
Connect the water supply using
piping (supplied by installer) with
½" NPT female threaded end .
C
Slowly open the water
supply lines to relieve air
and pressurize the valve .
Test the unit for leaks
and adequate flow .
E
Proper faucet shank/handle
clearance and recommended
minimum splash containment
dimensions must be considered
when selecting the desired
location for mounting.
Shown in the
"OFF" position
Halo eye/face wash unit is shown on a sample 27" (686mm) deck. Other units are similar.
Minimum dimensions necessary to contain splashing from Halo units are shown.
Apply pipe sealant (supplied by installer) to all male-threaded pipe joints. The top of the eyewash heads should be positioned
a minimum of 33" (838mm) and a maximum of 45" (1143mm) from the floor and 6" (152mm) from the nearest obstruction.
Shown in the
"ON" position