Lenox® Lockers (includes Cubby & “Z” Lockers)
Installation
7
Bradley Corporation • LK-INSTR-001 Rev. K; EN 07-1303
10/24/07
Installation Instructions continued . . .
Step 4: Corner Locker Installation
1. Drill four 3/16" dia. clearance holes 1-1/2" from the locker face through the locker box only (see
Figure 4). Fasten the locker to the corner filler with the #6 x 1-1/2" screws provided.
2. Secure each locker to the wall in two places with two 1/4" x 1-3/4" Lg. Tapcon screws, placing
one near the top and one near the bottom of the locker (refer to Figure 3 on page 6).
3. Position the additional lockers according to the submittal layouts. Square and plumb each locker
using shims as required. Fasten the lockers to each other using the #10 x 3/4" T-25 security
screws provided.
4. Secure each locker to the wall in two places with two 1/4" x 1-3/4" Lg. Tapcon screws, placing
one near the top and one near the bottom of the locker (see Figure 3 on page 6).
Figure 4
#6 x 1-1/2" LG.
SCREW
(FAST-LF026)
CORNER FILLER
