12
9/28/2017
Bradley •
215-1595 Rev. E; ECN 17-00-014
S93-572, S93-573, S93-574
Installation
6 Adjust Temperature with Water Running
H
C
A
Loosen Cap Screw about 1/4" (4-6
turns) and lift up cover (do not
remove) .
B
Using cover, turn cartridge gently
until desired water temperature is
reached . Do not turn past stops as
this may damage unit . Push cover
down and tighten screw .
7 Complete Installation
A
After the testing is complete, attach
the left and right bowl covers over the
piping/valve assembly underneath the
bowl .
B
Bolt the bowl covers to the wall with four
#10 bolts (supplied by installer) . Secure
the bowl covers to the tabs on the
underside of the bowl using the #10-32
screws provided .
C
Attach the trap cover to the wall using
four #10 bolts (supplied by installer) .
107-360
Screw Hole (Attach
Bowl Cover to Bowl)
Screw Hole (Attach
Bowl Cover to Bowl)
107-359
Left
Right
Trap Cover
(186-1658)
WARNING This valve is NOT factory preset. Upon installation, the temperature of this valve must
be checked and adjusted to ensure delivery of a safe water temperature. Water in
excess of 110°F (43°C) may cause scalding.
