Micro Controller
Operating Instructions
Contents
Introduction
Page 2
Connetions
Page 3
Primary Functions
Page 3
Menu Functions
Page 4
Wide Angle Lens
Page 4
Specifications
Page 4
The
Micro Controller
is a very small but powerfull controller for cameras and remote heads.
Almost all Bradley Engineering functions can be accessed from this tiny controller via the LCD
menu and the dedicated knobs and buttons.
Bradley Engineering
Units 14 - 20 Setley Ridge Vineyard
Lymington Road
Brockenhurst
Hampshire
SO42 7UF
UK
Tel: +44 1590 622440
Web: www.bradeng.com
Connections
There is just 1 XLR4 connector recessed into one end of the unit. This socket inputs power via 2
pins and outputs data on the other 2 pins. A dedicated ‘Y’ cable is supplied to break out this
socket into industry standard, individual XLR connectors.
Pin 1 - GND
Pin 2 - Data A (RS485)
Pin 3 - Data B (RS485)
Pin 4 - Power In
Primary Functions
The primary functions are accessed directly via the dedicated knobs and buttons. The LCD
display will show the values as they are changed.
Pan & Tilt
The thumb operated joystick on the right controls pan and tilt.
Touching down
this joystick puts the remote head into its top speed for fast repositioning.
Releasing the touch down reverts the head to the previous speed setting. Both
axes can be reversed via the LCD menu.
Zoom
The left side joystick moves only forwards and back and controls the
zoom. The direction can be reversed via the LCD menu.
Focus
The focus control is illuminated blue and on the extreme left of the console. It
can be operated either from the top of the panel or with the knurled wheel in
the rece ssed end plate.
The direction can be reversed via the LCD menu.
Depressing this knob once changes the focus to fine or coarse control. When
the focus is in coarse mode the blue LED is bright.
Iris
Rotating the Iris knob adjusts the iris setting from F1.6 to F28. The setting will
be shown briefly in the LCD display as it is adjusted.
Rec/Stop
The Record / Stop button illuminates Red when a record command is sent.
Assign
This is a touch down knob. When touched down and simultaneously rotated
the
menu
page is changed. When the desired page is displayed release the
touch down and the knob now controls the value of the setting.
Aux
The Aux button is used in conjunction with the
menu
to send the value
selected with the knob. The display indicates when this is required.
