Bradford BALBOA M3, Installation & Operation Manual

Page: 30 / 50

Residential Spa
pg. 30
File: RES_Hottub_manual_021116
Testing Your Spa Set Up
System Programming
Setting the Time of Day
When the spa is first powered up, the words “SET TIME” will flash on the display.
To set the time, press then or After or is pressed once, the time will
begin changing in one-minute increments. Press either pad to stop the time from changing.
Press to enter your correct time into the system.
Optional Filter Cycle Programming
While you are not required to set filter cycles, if you want to change them, press within
3 seconds. “SET START FILTER 1” will appear on the display.
Press or to reset the filter start time.
When “SET HEAT” is on the display, press (on) to warm the water during filtering,
or press (off) to disable the heater. Press to see “SET STOP FILTER 1” and adjust the time
with the or pads as done above.
Press to see “SET START FILTER 2” and proceed as above.
Pressing will enter the new filter cycle times into the system and display the current
water temperature.
Locking the Panel
Press within 3 seconds. When locked, the display will show the temperature you have
chosen, along with the lock symbol. All pads are frozen except the pad.
Unlocking the Panel
Press within 2 seconds. The lock symbol will disappear and all panel pads will
work again.
Locking the Temperature
While setting your spa water temperature, after you have pressed or , press
within 3 seconds to activate the lock. When locked, the center display will show the spa temperature
along with the lock symbol.
Unlocking the Temperature
Press or then within 2 seconds.
Freeze Protection
If the high-limit sensor detects 40°F at the heater, then all equipment is automatically activated to
provide freeze protection. This is a normal spa function; no corrective action is necessary. The equip-
ment stays on until the sensor detects 45°F at the heater. Freeze protection is enabled regardless of
the status of the spa. In colder climates, an optional additional freeze sensor may be added to protect
against freeze conditions. See your dealer for details.