Bradford BALBOA M3, Installation & Operation Manual

Page: 12 / 50

Residential Spa
pg. 12
File: RES_Hottub_manual_021116
Preparing to Install Your Spa
Preparing to Install Your Spa
CAUTION:
Read all instructions before beginning the installation. Failure to follow these instructions
could cause serious body and/or property damage.
Most standard residential spas can be installed in one to two days.
NOTE:
You will need to hire a licensed electrical contractor to wire the spa equipment pack to your
household electrical panel.
Unpacking Your Spa
When you first receive your spa and equipment pack, unpack it and look it over for any damage that
might have occurred during shipping. An empty spa can weigh hundreds of pounds, so you will need
several people to help move it. When you move the spa, you should hold it by the stainless steel
support frame. Heavy work gloves will help prevent cuts and scrapes form exposed metal surfaces.
WARNING:
Do not try to carry the spa by holding the attached plumbing pipes.
Doing so could break the pipes and void your warranty.
Table 3 : parts List
Component Description
Spa Cover
Insulated to prevent heat loss from the water surface.
Spa Care Package
Provides tools for general maintenance and cleaning, including:
• Underwater light lens removal tool
• Brominating floater
• Spa vacuum
• Stainless Steel Wire brush
• Scrub sponge
Taylor K-2005
(high range)
water chemistry
test kit
Includes nine tests for thorough testing: total chlorine, free chlorine, bromine,
pH, acid demand, base demand, total alkalinity, calcium hardness, and cyanu-
ric acid. Includes a testing and treatment guide.
Naturally Free
Metal & Scale
Control
Sequestering agent to remove metals from the water