10
Location
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around
the back of the cabinet. To ensure best performance, if the appliance is
positioned below an overhanging wall unit, the minimum distance between the
top of the cabinet and the wall unit must be at least 100 mm. Ideally, however,
the appliance should not be positioned below overhanging wall units. Accurate
levelling is ensured by one or more adjustable feet at the base of the cabinet.
Warning!
It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily accessible
after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating
plate correspond to your domestic power supply. The appliance must be earthed.
The power supply cable plug is provided with a contact for this purpose. If the
domestic power supply socket is not earthed, connect the appliance to a separate
earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are
not observed. This appliance complies with the E.E.C. directives.
Daily Use
First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal
accessories with lukewarm water and some neutral soap to remove the
typical smell of a new product, then dry thoroughly.
Important!
Do not use detergents or abrasive powders, as these will damage the
finish.
Temperature Setting
•
Plug on your appliance. The internal temperature is controlled by a
thermostat. There are 6 settings.
1
is warmest setting and
5
is coldest setting and 0 is off.
•
The appliance may not operate at the correct
temperature if it is in a particularly hot or if you open
the door often.
Movable shelf
The shelf is able to be moved to suitable positions.
