6
DESCRIPTION
Pictures are for reference only
The appliance should be installed well away from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the
cabinet. To ensure best performance, if the appliance is positioned below an
overhanging wall unit, the minimum distance between the top of the cabinet and the wall
unit must be at least 100mm. Ideally, however, the appliance should not be positioned
below overhanging wall units. Ensure that the freezer is levelled by adjusting one or more
of the adjustable feet at the base of the cabinet.
WARNING!
Ensure that it is possible to disconnect the appliance from the mains
power supply. Ensure that the plug is easily accessible after installation.
ELECTRICAL CONNECTION
Before plugging in, ensure that the voltage and frequency shown on the rating plate
correspond to your domestic power supply. The appliance must be earthed. The power
supply cable plug is provided with a contact for this purpose. If the domestic power
supply socket is not earthed, connect the appliance toa separate earth in compliance
with cu
rrent regulations and in consultation with a qualified electrician. Brabantia will not
insure and will in no way be responsible for failure to strictly adhere to this instruction
manual. This appliance complies with E.E.C. directives.
CLEANING THE INTERIOR
Before using the appliance for the
first time, wash the interior and all internal
accessories with lukewarm water and some neutral soap to remove the
typical smell of a new product. Dry the interior thoroughly.
WARNING!
Do not use detergents or abrasive powders, as these will damage
the finish.
