8
ENGLISH
Complete User Manual
Tesla 2 W10
GETTING STARTED
Inserting and Removing the MicroSD Card
Your BQ Tesla 2 W10 has an internal memory that can be expanded to 32 GB using a
MicroSD card.
To insert a MicroSD card, follow these steps:
Insert the MicroSD card into the slot, making sure that the metal pins are facing inwards
and towards the screen, as shown in the diagram:
Push the card in until you hear a slight click, which indicates that it has been inserted
correctly. If the card is not inserted correctly, the device might not recognise it.
To remove the MicroSD card, follow the steps above in reverse, bearing in mind the
following recommendations:
a) For greater security, switch the device off before removing the MicroSD card.
b) If you need to remove the MicroSD card while the device is switched on,
unmount it first to avoid damaging the card and losing any data.
To unmount the card, press the triangle icon on the bottom right of the
desktop taskbar. Select the USB connector icon in the box that pops up.
When you see a message stating that it is now safe to unmount the MicroSD
card, you can remove it.
Getting Started
