2
General Notes
• Read the instructions carefully before beginning the installation and carry
out the actions as specifi ed by the manufacturer.
• The installation, programming, commissioning and maintenance of the
product must only be carried out by qualifi ed technicians, properly trained
in compliance with the regulations in force, including health and safety
measures and the disposal of packaging.
• The installer must ensure that the information for the user, where there is
any, is provided and delivered.
• Before carrying out any cleaning or maintenance operation, disconnect the
devices from the power supply.
• The equipment must only be used for the purpose for which it was
expressly designed.
• The manufacturer declines all liability for any damage as a result of impro-
per, incorrect or unreasonable use.
eventuali danni derivanti da usi impropri, erronei ed irragionevoli.
DISPOSAL
- Do not litter the environment with packing material: make sure
it is disposed of according to the regulations in force in the country where the
product is used. When the equipment reaches the end of its life cycle, take
measures to ensure it is not discarded in the environment. The equipment
must be disposed of in compliance with the regulations in force, recycling its
component parts wherever possible. Components that qualify as recyclable
waste feature the relevant symbol and the material’s abbreviation.
CE Declaration
- BPT S.p.A a Socio Unico declares that this device complies
with directive 2004/108/EC. Original upon request.
VAS/101
Installation
The power supply unit must ALWAYS be installed horizontally. The device
can be installed on DIN rails (EN 50022)
, on a suitable switchboard, or
on the wall using the terminal board covers
. To dismantle it, proceed as
shown in fi gure
.
NOTE. Ensure there is correct ventilation if the power supply unit is
installed in a metal case.
Technical features
Type
VAS/101
Power supply [V AC]
230
Max current demand [A AC]
0,2
Max energy dissipation [W]
10
Nominal power supply [V DC]
18
Nominal current demand [A DC]
1 for 1’
Nominal current demand [A DC]
0,5 for 3’
Storage temperature [°C]
-25 ÷ +70
Operating temperature [°C]
0 ÷ +35
IP Rating [IP]
30
Functions
Terminal boards
~
Mains
~
Terminal boards
–
+
Power supply 18 VDC (*)
(*) The appliance is electronically protected against overloads and short
circuits.
A
1
2
3
B
43,5
45
7,5
57
70
106
M
2
M
1
+
–
KIT FREE_LC-LVC 24810470 25-11-14_EN
