4
Recessed installation (optional)
Wall in the recessed box
at the desired height, respecting the positioning
of the lens of the surveillance camera
. Push the pipe with the system
conductors through one of the breaking points (
point A).
When using the recessed box any possible deformations can be avoided by
using the spacer provided (
point B).
Using the Allen screwdriver remove the cover
. Position the frame
surround in the recessed box
, push the connection cables through
hole
and secure the entry panel
. Take off the terminal board
cover
and make the connections. Once the connections have been
made, put back on the terminal board cover and assemble the front cover.
Accessories
DPS single button;
LTP Wall roof;
Recessed box LSI;
Recessed frame LCI;
$
%
C
D
F
E
Assembly and removal of buttons modules
Insert the button module
paying attention to the up to down orientation
.
Remove the small piece of glass and write the names
paying attention
to the direction of insertion of the glass panel
.
KIT FREE_LC-LVC 24810470 25-11-14_EN
