background image

READ INSTRUCTIONS CAREFULLY BEFORE USE AND STORE 

IN A SAFE PLACE FOR FUTURE REFERENCE 

 

 

General Safety Instructions 

Read this manual thoroughly before first use and keep it in a safe place for future 

reference, along with the completed warranty card, purchase receipt and carton. 

The safety precautions enclosed herein reduce the risk of fire, electric shock and 

injury when correctly adhered to.   

Follow all instructions and take notice of all warnings to reduce the risk of 

fire or electric shock.

 

Electrical safety and cord handling

 

• Before installing this equipment, make sure your outlet voltage corresponds to 

the voltage stated on the appliance rating label. 

• To prevent contact with high voltage components inside, do not attempt to open 

the equipment.   

• When connecting the equipment, align the plug properly and insert it fully to 

prevent electric shock. 

• Only use this equipment with the cord and plug supplied, and do not overload 

the power outlet.   

• If the power cord is damaged, do not use the equipment. The cord must be 

replaced by the manufacturer or similarly qualified personnel in order to avoid a 

Summary of Contents for BT-13B













Reviews: