using an RCA cable (not supplied).
Red plug into R/H channel input.
White plug into L/H channel input.
Playing :
-
Place the record of your choice on the turntable. If required, do not
forget to place the adaptor on the record spindle.
-
Choose the desired playing speed using the speed selection switch
between 33.3, 45 and 78rpm.
-
Turn on the Rotary Power Switch. Heads up! This also controls
volume.
Release the tone arm lock.
-
Raise the arm with your hand lightly.
-
Place the stylus vertically over the first track of the record, the
turntable will start turning automatically.
-
Put down the stylus slowly on to the record to play.
-
When a record comes to the end, the turntable will stop automatically
if the auto-stop switch is in the ON position. If the switch is in the off
position then it will keep revolving until the tone arm is returned to the
tone arm rest.
-
Lift up the tone arm and put it on the rest when finished.
-
Replace the protective cap on the stylus and close the tone arm lock.
-
Turn off power at mains.
Instructions
Listening to radio (Radio tuning)
1. Turn the volume knob in a clockwise direction to turn the equipment on.
2. Use the function selector to select TUNER mode.
3. Use the radio band selector to select the desired band (AM, FM or FM-Stereo).
4. Turn and hold the tuning knob for a few seconds to tune into a radio station.
