OPERATION
G-Sensor Calibration
14
G-Sensor Calibration is needed after installing the VTR400.
It detects the installed direction of the VTR400 (vertically or horizontally) for
it to accurately record the journey direction.
Press and hold [PANIC] & [SHUTTER] button together and then power on.
G-Sensor Calibration screen will be displayed.
Retry
This G-Sensor calibration is only needed at the first time the VTR400 is used.
Press and hold panic and shutter button
simultaneously more than 2 sec for calibration
Press any single button to escape
Park vehicle on a flat surface with
at least 50 meters of space directly ahead
and press panic button once
G-Sensor Calibration is finished successfully
Press any button or wait 30 seconds to reboot
G-Sensor Calibration is failed
Park vehicle on a flat surface with
At least 5 meters of space directly ahead
And press panic button once again
Move directly forward and accelerate vehicle till beep
sound occur
Summary of Contents for VTR400
Page 2: ......
