SD Memory Card Format
Remove the power first. Press and hold the [PLAYBACK] & [PANIC] button.
Then connect the power.
Press and hold the [PLAYBACK] & [PANIC] more than 2seconds after
booting. Then SD card initialization will start.
Once complete, all video & log files will be deleted and the configurations
will default to the factory settings.
*This function can also be performed on a PC with the PC viewer
software.
Built-in power backup (Super Capacitor)
When power to the unit is interrupted, VTR400 creates the last file using the
internal Super Capacitor.
BLUE LED (RECORD)
The blue LED shows the power is on.
The blue LED blink during event recording.
RED LED (Overwriting)
The red LED will be turned on when start overwriting.
Buzzer
FUNCTION (MAIN UNIT)
11
“Beep” sound will occur when event/panic recording starts (this can be turned off
In the setting menu on the PC viewer, if required).
This also signals any system error.
VIDEO LOSS (warning)
“Beep” sound will occur continuously when there video loss. LEDs will also flash
To provide visual indication of video loss.
Check the camera and camera connection and turn off and on the unit to resolve
The issue.
Also, make sure the number of cameras that you connect is the same amount that
You have selected in the settings (check settings menu on PC viewer software.
Notice : PC Viewer software is pre-loaded on the SD card. Please ensure
you have installed the software to your PC before you format the card.
Summary of Contents for VTR400
Page 2: ......
