OPERATION
* OP MODE: to set the operating
modes for Dolby Digital decoder,
there are LINE OUT and RF
REMOD to be selected.
* DYNAMIC RANGE: you can
adjust the dynamic range between
1/8, 2/8. 3/8, 1/2, 5/8, 3/4, full.
* DUAL MONO: there are STEREO,
MONO L, MONO R and MIX
MONO to be selected.
˓
On-screen Display Function
Press the
DISPLAY
button on the front
panel or on the remote control during
playback to display the console
information of the current disc on the
screen.
For an example (when playing a DVD
disc):
Once you press
DISPLAY
button you
will see the information as the following
order.
1) Item: TT
Function: Display the current title
number and total title
number.
2) Item: CH
Function: Display the current chapter
number and total chapter number.
3) Item:
(This icon only displayed
for several seconds, after several
seconds it will disappeared.)
Function: Display the played time of
the current chapter.
4)
C-
: Display the remaining time of the
current chapter.
5)
T
: Display the played time of the
current title.
6) T-: Display the remaining time of the
current title.
7) C: Display the played time of the
current chapter.
8)
Display the current disc’s LANGUAGE,
AUDIO TYPE, SUBTITLE
LANGUAGE and PLAY ANGLE.
Note: The displayed information is
different according to different type of
discs.
˓
Last Play Memory
1) During disc playback, if you turn off
the unit and then turn on the unit
again, the DVD unit will resume
playing from the point that just
interrupted.
2) During disc playback, if you press
MODE
button on the remote control or
SRC
button on the front panel to
switch to other mode, then return to
DVD mode again, the unit will resume
playing from the point that just
interrupted.
AV OPERATION
On the front panel of the unit, there is a
AV IN jack. When you connected AV
input device from the jack, press
MODE
button on the remote control or
SRC
on the front panel to select AV mode.
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
19
