20
Cleaning, maintenance and repair
Sprühboy 04s - Airless Edition 10.12
5.2.2
Entire implement
- Separate the compressed air supply from the
external compressed air source. Refer to chapter
"Filling the Sprühboy 04s with the required agent
pressure", page 14 in this regard.
- Pull the bleed valve until the hissing noise stops.
Refer to chapter "Filling the stainless steel
pressure vessel", page 13 in this regard.
- Pull the rapid coupling (1) from the agent vessel
connection piece (2).
- Put down the agent hose with the spray gun in a
safe place.
- Open the pressure vessel cover once the stainless
steel pressure vessel is pressure less. Refer to
chapter "Filling the stainless steel pressure
vessel", page 13 in this regard.
- Empty the stainless steel pressure vessel.
- Fill the stainless steel pressure vessel with hot
rinsing water and disinfecting cleaning agent.
- Reseal the stainless steel pressure vessel with the
pressure vessel lid cover.
- Vigorously shake the stainless steel pressure
vessel.
- Empty the stainless steel pressure vessel.
- Dispose of the cleaning residues in an
environmentally compatible manner.
- Refill the stainless steel pressure vessel with
approx. 2 litres of hot rinsing water and
disinfecting cleaning agent.
- Reseal the stainless steel pressure vessel with the
pressure vessel lid cover.
- Push the rapid coupling (1) back onto the agent
vessel connection piece (2).
- Connect the compressed air supply with the
external compressed air source.
- Fill the implement with compressed air.
- Afterwards, spray the entire contents of the
stainless steel pressure vessel into a collecting
basin. Agent hose and spray gun are cleaned
through this.
- Afterwards, fill the stainless steel pressure vessel
once more with clear rinsing water.
- Rinse the entire system with the clear rinsing
water.
- Afterwards, clean the spray gun's agent-nozzle.
