Marking on the devices
Danger of fire and short
-
circuit
•
Do not operate the device with wet hands.
•
Clean the equipment only in the way described in
Maintaining Your Microphone
•
Take care to avoid dropping the equipment. Make sure that the device is properly
fastened and reliably mounted. If the device has been dropped, have it inspected
by a skilled technician before you switch it on again.
•
Should the equipment be damaged or defective, or if you notice a scorching
smell, remove the batteries immediately. DO not operate the device with a
damaged housing and do not repair the device yourself. Have the device only
repaired by a skilled service person.
•
Always keep your device in good condition, as specified on these instructions for
use.
•
Do not tamper with or alter the internal components of the microphone.
Danger of suffocation caused by small parts
•
Keep the device out of the reach of children and pets.
Precautionary measure when using the batteries.
•
Batteries/power packs, if inappropriately handled, can run out or explode.
•
Please observe the following notes on safety when handling batteries to be used
in this device:
•
Use only batteries mentioned in these operating instructions.
•
Do not discard of the batteries in a fire and do not expose them to direct heat.
•
To avoid damage to the product, you must make sure that you remove the
batteries, if you do not use the product over a long period of time, or if the
batteries have been discharged.
•
If battery fluid meets skin or clothes, rinse it off immediately with fresh water.
Features:
•
Broadcast recording quality microphone for clear, precise audio
•
Super-cardioid polar pick-up pattern
•
Lower Noise and Higher Sensitivity
•
Two step High Pass Filter (flat, 80Hz)
•
Three position level control (-10dB, 0, +20dB)
•
1/4” Threaded Mount
•
3.5 Output Plug
•
Durable ABS Construction