Troubleshooting
Problem
Solution
No sound was
recorded
Make sure that two fresh AA Batteries are installed and
correctly oriented in the battery compartment.
Make sure the power switch on the microphone is set to the
ON position and the LED indicator is on.
Make sure that 3.5mm mini plug is connected to the correct
AUDIO INPUT jack on the device to which you are recording.
Microphone stops
working
Verify LED is lit when power switch is in the ON position.
Replace battery if not.
Sound is too quiet
Enable the microphone boost (-20dB switch), move closer to
the subject, consult camera owner’s manual for audio
recording settings.
Sound is distorted
Make sure the microphone boost is switched off, move away
from the subject, consult camera owner’s manual for audio
recording settings.
The microphone is
stuck in the camera’s
shoe mount
Make sure the locking wheel is fully loosened.
Maintaining your microphone
•
Keep your microphone away form dust, moisture, or water.
•
To clean the housing, wipe with a dry micro-fibre cloth to remove dust.
•
Store your microphone in the included pouch to protect it from dirt and dust.
Important safety information
•
Make sure that you follow all safety notes.
•
Keep these instructions for use in a safe place. If you sell the equipment or pass it
on to someone else, you should also pass on these instructions for use.
