1
Overview
Features
!
2.7kgs Micro-Portable projector.
!
High Brightness with high Contrast ratio, total power consumption 220 W.
!
A wide variety of External Connections available for D-Sub 15 pin, S-Video,
RCA composite signal and DVI Input
（
XGA Type
）
.
!
Good Compatibility
：
horizontal scanning frequency from 15 to 90KHz, and
vertical scanning frequency from 43 to 85Hz , VGA to SXGA Signals.
!
Short projection distance for Big image size.
Projection distance 1.33m
〜
8.33m with screen size from 40”to 200”.
!
Powerful functions
：
Keystone correction function
、
freeze and blank function
、
Digital zoom adjustment and PIP(Picture In Picture) function.
!
Remote controller with Track Ball Mouse function and Laser Pointer
function.
Warnings
!
While projector is working, don’t look into the lens to avoid harm of eyes.
!
Do not use projector near heater or water.
!
While projector is working, make sure that there is no barrier to the heat
dissipation holes of the front and rear side of projector.
!
Do not use multiplex socket, to avoid overload or short circuit.
!
The lamp of the projector is high voltage mercury lamp, which needs
specific driving circuit. Please use the specific lamp provided by your dealer.
!
Never let water or other things splash into the heat dissipation holes.
!
To shut down the projector, when you press the Power key, a message will
show on the image asking if you’re sure you’d like to shut down, press
Power key again to proceed the heat dissipation and shut down procedure.
!
Do not turn off the power without using the heat dissipation and shut down
procedure. You must wait until the cooling fun stop. If the machine is not to
be used for a long time, the power plug must be pulled off to avoid danger.
!
No further dismantle of the projector except listing in the operation manual.
!
When cleaning filter sponge, please use vacuum cleaner than water to avoid
moisture entering the projector.
!
When replacing the lamp module, please wait for the lamp cool down.
!
When changing the lamp module, do not touch the glass in front of the lamp.
It will effect the lamp life.
