15
Replacing Main Lamp
Replacing Lamp Module
!
When the red indicator is flashing and the lamp doesn’t lighting up, the lamp
source might abnormal or burn out.
!
When the projection image is too dark, or the projection image is unstable
and flashing , please change the lamp.
!
Please use specific lamp module provided by your local dealer.
!
Turn off projector and unplug power cord.
!
Loosen the 2 screws of the cap of lamp module.
!
You need to find a special star type screwdriver.
!
When screws are loosed, take off the cap of lamp module.
!
Loosen the 3 screws placed on the lamp module.
!
Pull up the handle of the lamp module and pull the lamp module out of
projector
!
Install the new lamp module provided by your dealer into the projector.
!
Fasten the 3 screws of the lamp module.
!
Install the cap of lamp module then fasten 2 screws of the cap.
Lamp Module
