BOXLIGHT SP-45m, User Manual

Page: 12 / 37

11
Shutting down the projector
" '- ,('(#( .
6, :"#( " '' .
" " '- :" ,# " .
, 9 (' ' :
D,9 " #( '' +, (#
" % %. " % #L%( ,, :% '# 8:
" '- " %. ",(
" ,' . +, :(
" :% '# 8:
" '- ' "
power
. ("(
" '- (' #" ' #"
:
D " " (' #"
power
, :" ,'" /1 9# ,
" " " ,':!" " ,'"
" /1#"# " ':$'#" ' '
" '- ,' (
:
Troubleshooting your setup
(,# '' (" 9'" > )
: "" ':
" /1'" '- " " '-
" '( ":
" # ",,' ,:, ,
" ' '. :(" "
" ( ' :!" " ' ,. (9'"
:
Table 1: LED behavior and meaning
LED color/behavior Meaning
solid green The projector is plugged in, or the projec-
tor has been turned on and the software
has initialized. The projector has been
turned off and the fans have stopped.
blinking green The power button has been pressed and
the software is initializing, or the projec-
tor is powering down and the fans are
running to cool the lamp.
blinking red A fan or lamp failure has occurred. Turn
off the projector and wait one minute,
then turn the projector on again. If the
projector has been working for 2000
hours or more, replace the lamp and reset
the lamp timer. Also check for a blocked
vent or a stopped fan.
solid red An unidentifiable error: please contact
Technical Support.