Version 1.0
11
4. PC Connection
1. Connect RGB cable to RGB, Voice connection will be connected to PC AUDIO IN with stereo cable.
2. HDMI cable will be connected to (display and voice are available at the same time)
3. External speaker will be connected to R , L input with using Ø3.5 stereo cable and
then connect same as below drawing. L, R connection is same. Internal speaker will not output.
Note) Don’t connect NC
5. When using OPS PC CAUTION
1. Do not connect to touch sensor USB cable.
(Touch sensor cable is already connected by internal OPS docking board)
2. After connecting adapter, turn on the OPS PC.
3. Refer to bottom when remove the OPS PC OR use external PC.
4. OPTIONS-
OPS-
After the change in use Enable to Disable.
Notes
: Please turn off the power when connecting external speakers.
: If there are no any sound when connecting to speaker with power-on, please restart it once again
