BOXLIGHT PRO80S3, User Manual

Page: 25 / 33

BOXLIGHT PRO80S3 Projector Preliminary User’s Manual
Page 25 of 33
3.3 Enhanced Color Correction (P7) Commands
ECC
Select P7 TARGET DATA ECC
Select the Target Color Data. This command takes a parameter – the target index – between 0 and 13. The following table
lists the GRBW CIE color coordinates for the selected ECC index. Note that indicates 1 through 9 do not specify the
Magenta, Cyan or Yellow CIE values. Indices 10 through 13 specify user-definable tables which may include the CMY
coordinates as well as GAIN values for each of the colors and WHITE. See TI document –
Product Specification for
DDP1000, DDP1010, DDP1011 Based Modular Formatter Component Set [Dwg #2503986, Rev. J or later] for details.
Target Color Gamut Data
GREEN RED BLUE WHITE
Index Description
X Y X Y X Y X Y
0 OFF ECC OFF
1
ANSI - 3200°K
.423 .399
2
ANSI - 5400°K
.335 .349
3
ANSI - 6500°K
.313 .329
4
ANSI - 9300°K
.210 .710 .670 .330 .140 .080
.283 .297
5 EE-REC709
6
EE-XYZ
7 User 2
8
User 3
N/A
N/A
User Selectable GREEN, RED, BLUE, MAGENTA, CYAN,
YELLOW and WHITE CIE Indices stored in EEPROM
(See TDNLD)
9
Native
.316 .651 .655 .341 .147 .044 .296 .337
Syntax: ecc {target index}
> ecc2
EC Set Index 2
ECC Enable
Freeze Frame On
Freeze Frame Off
MDNLD Download Measured Color Gamut Data MDNLD
Download Measured Color data for storage on the BLUE Formatter’s EEPROM. When the command is entered, the
operator is prompted to send 16 bytes of data: the X and Y CIE coordinates of the un-enhanced GREEN, RED, BLUE and
WHITE colors. Each coordinate is 16 bits - 2 bytes - sent least significant byte first in hexadecimal. For each coordinate,
first multiply by 65536 and convert to hexadecimal. Output two hexadecimal bytes, LS byte first, for each of the 8
coordinates in order: Gx, Gy, Rx, Ry, Bx, By, Wx, Wy , Bx By ,WY and BY. The values can be manually typed from the
terminal or stored in a file and sent to the controller board using the terminal’s “Send Text File” utility. Characters typed of
sent will NOT be echoed. The 16 bytes sent may be <SPACE>, <TAB>, <CR> or <LF> separated.
After the data is downloaded, the coordinates will be displayed in decimal format for confirmation.