BOXLIGHT PRO80S3, User Manual

Page: 21 / 33

BOXLIGHT PRO80S3 Projector Preliminary User’s Manual
Page 21 of 33
LAMPON1
LAMPON1
LAMPON2 LAMP On/Off LAMPON2
LAMPOFF1 LAMPOFF1
LAMPOFF2 LAMPOFF2
Turn ON/OFF the lamp, when system is powered on. LAMPON1 is turn lamp 1 on; LAMPOFF1 is turn lamp1 off.
LAMPON2 is turn lamp 2 on; LAMPOFF2 is turn lamp2 off. In dual-lamp mode, user turn off one lamp, the system will
switch to single lamp mode, and store the mode to EEPROM.
Syntax: LAMPON1
LAMPOFF1
LAMPON2
LAMPOFF2
> lampoff1
LAMP1 OFF !
> lampoff2
LAMP2 OFF !
> lampon1
LAMP1 ON !
> lampon2
LAMP2 ON !
M+,
M- Informational Message Reporting Control M+, M-
Syntax: m+
m-
> m+
Monitor Info. On !!
> m-
Monitor Info. Off !!
ON, OFF, ONS, OND
POWER Control ON, OFF, ONS, OND
Power sequencing commands. See section 1.3 for more details.
ON and OFF Power Sequencing Commands
Command Current State Resulting State
STANDBY [RED] POWER ON
POWER ON [GREEN] NO CHANGE
5 MINUTE POWER DOWN [YELLOW] POWER ON – Power Down Cancelled
ON
ONS
OND
60 SECOND POWER OFF [YELLOW] POWER ON – Lamp re-strike after 90 second
lamp cool-down
STANDBY [RED] NO CHANGE
POWER ON [GREEN] 5 MINUTE POWER DOWN – Shutter closed
5 MINUTE POWER DOWN [YELLOW] 60 SECOND POWER OFF – Lamp OFF,
Shutter closed
OFF
60 SECOND POWER OFF [YELLOW] NO CHANGE