BOXLIGHT BL WX25NU User Manual Download Page 61

Page: 61 / 71

Maintenance of Projector

Air Filter

When a warning message appears to remind you to clean the air filter, please replace a
new one as soon as possible. Please check and clean the air filter periodically.

Replacing the Air Filter

When the use time reaches the filter counter time, the projector will display a message

that indicates to replace a new filter. If there is no spare air filter available, please contact

your dealer.

Turn off the projector, and unplug the power cord. Allow the projector to sufficiently

cool down.



Remove the filter cover from the right side of projector.



Pull out the air filter.



Install a new air filter.



Put the filter cover on.



Reset filter timer after cleaning or changing air filter. (P.35)

New one

Summary of Contents for BL WX25NU








































































Search results

Summary of Contents for BL WX25NU

Reviews:

Related manuals for BL WX25NU

Brands by name

Popular brands

BOXLIGHT BL WX25NU, User Manual

Search results

Summary of Contents for BL WX25NU

Reviews:

Related manuals for BL WX25NU

Brands by name

Popular brands