BOX tracker
Communication Protocol v1.5
22 of 36
6.18
GPSLI_IOFF
Defines the interval (in seconds) between successive vehicle location logs whilst the ignition is off. This
only defines the interval between logs and not the frequency the data is sent to the server.
Eg: Log locations every hour whilst the ignition is off
GPSLI_IOFF,3600
Default value:
86400 seconds (24 hours)
Range:
0 to 4,294,967 seconds (49.7 days)
6.19
IMMOBILISER
This functionality allows the BOX-tracker unit to control one or both of its outputs to provide the
immobilisation feature. The immobilisation feature enables and disables the vehicles ignition cranking
circuit depending on the state of digital output 1 and uses digital output 0 to sound a buzzer.
IMMOBILISER,<0-2>
0 = Immobiliser is not fitted and the out commands are enabled
1 = Immobiliser relay fitted. Command out1 is disabled
2 = Immobiliser relay and buzzer fitted (out commands are disabled)
Default value: 0
See Also IMMOB, VALIDATE_KEY, ADDKEY, DELKEY, OUT#
6.20
IMMOB
The IMMOB command specifies how the immobiliser operates in relation to driver ID key reading and
also allows for remote immobilisation via SMS, GSM & GPRS. When the IMMOB command a GPS event
code is recorded.
IMMOB,<
Value
>
Value
Description
Logged GPS
event code
0
Allow the vehicle to start if a valid Ibutton is presented
39
1
Prevent the vehicle from starting
40
2
Allow the vehicle to start
41
Default value: 0