BOX tracker
Communication Protocol v1.5
25 of 36
6.28
ODOMETER_TRIP
Each log entry contains the distance travelled since the start of the journey. If this is set to 1 then the
distance is reset to zero at the end of each journey and the distance acts as a trip meter. If it is set to
zero the distance is not reset and the distance acts as an odometer reading.
Default value:
1 (Enable trip readings - reset odometer at end of each journey)
Range:
0 or 1
6.29
OFFSW
Enable or disable the use of the trackers inbuilt push button switch to turn the tracker off. Set to 1 to
allow the tracker to be turned off and 0 to prevent this.
To prevent the off pushbutton turning the tracker off
OFFSW,0
Default value:
1 (enabled)
Range:
0 or 1
6.30
OUT#
Allows the trackers digital output to be turned on or off. The output number should be used in place of
the # in the command name
Set output 0 on (high)
OUT0,1
Set output 1 off (low)
OUT1,0
Default:
0
Range:
0 or 1
6.31
PANIC_BTN
If enabled (set to 1) and digital input 0 becomes high a panic event code 5 is logged and sent to the
server.
Default value:
0
Range:
0 or 1
