BOX tracker
Communication Protocol v1.5
19 of 36
SPEEDALM 0
UPLOADD 320
UPLOADHC 1
UPLOADI 300
UPLOADI_BOFF 86400
UPLOADI_IOFF 86400
VALIDATE_KEY 1
VBAT12 1
OK
6.6
DEFAULT
The default command sets all settings to its default state (factory default). Most alarms and events are
disabled.
6.7
DELKEY
This command is used remove a driver ID key from the key table that has previously been added using
the addkey command.
E.g. to delete key 123456789ABC from group A enter
delkey,A,123456789ABC
The
DELKEY,ALL
command will delete all keys (in all groups).
6.8
DIR
Returns a list of all files on the tracker.
6.9
FWS_TIME
If the firmware update protocol (section 4) is not being implemented on your system then firmware
updates can be obtained from the servers at BOX Telematics.
This parameter defines how often the tracker checks these servers for updates. If this is set to 0 then no
checks will be made and any firmware will need to be updated in accordance with the update protocol
in section 4.
Default value:
3600 (Do not check BOX Telematics for updates)
Range:
0 to 2,147,483,646 seconds
