0
13.0 - REPLACEMENT oF LoCK-ouT LEvER
Tools Needed:
• Phillips Screwdriver
• 7/16 inch wrench
NOTE: If using a powered driver, it must be on the
“LOW TORQUE” setting, otherwise it will strip
screws.
13-1 Unplug machine from wall outlet and from front of unit.
13-2 Wait 5-minutes after unplugging machine to ensure
there is no residual power.
13-3 Remove the front base plastic (4 screws) see
Figure 1.
13-4 Remove the right and left top base plastic (3 screws
each) see Figure 1.
13-5 Loosen the setscrew with a Phillips screwdriver
and pull cable through the plastic junction. See
Figure 3.
13-6 Remove the old lockout lever by removing 7/16 inch
bolt and retaining spring. Remove the cable and
fine adjustment assembly from the old lever. See
Figure 2, 4 and 5.
mechanical service guide
Figure 1:
Figure 2: unlock Treadles Position
Figure 3: Major Adjustment
AS LoNG AS THE TREADCLIMBER
®
FITNESS
MACHINE IS PLuGGED INTo A PoWERED ouTLET
AND THE PoWER SWITCH IS oN, THE uNIT IS
RECEIvING PoWER, EvEN IF THE DISPLAY IS
TuRNED oFF. ALWAYS uNPLuG THE PoWER CoRD
FRoM THE ouTLET AND WAIT 5-MINuTES BEFoRE
PERFoRMING REPAIRS oR MAINTENANCE.
7! 2 . ) . '
! 4 4 % . 4 ) / .
$ ! . ' % 2
)--%$)!4%!#4)/.2%15)2%$
# ! 5 4 ) / .
Right & Left Top Base
Plastic Covers
Front Base
Plastic Cover
Treadle Lockout Lever
Treadle Lockout Lever
Faceplate
Setscrew
Junction Plastic
Cable
