Bowflex TREADCLIMBER 1000 Page 39 Owner'S Manual Download

Page: 39 / 44

Owner’s Manual

Condition / Problem

Things to Check

Solution

I/O cables (cables connected

in assembly Step 8)

If LED D is flashing when the belts are turning but belts

stop with err LS or OS displayed, the speed sensor

signal is not reaching the console. This indicates a

problem with the I/O cables.

Turn off the power switch and unplug the machine.

To reduce the risk of electrical shock or

unsupervised usage of the equipment,

always unplug the power cord from the

wall outlet and/or the machine and wait 5

minutes before cleaning, maintaining or

repairing the machine. Place the power

cord in a secure location.

Inspect connections for signs of visible damage to any

of the I/O cables. If no damage, check continuity using

a multi-meter. If a multi-meter is not available, contact

customer service for replacement cables and further

assistance.

Troubleshooting

Summary of Contents for TREADCLIMBER 1000













































Search results

Summary of Contents for TREADCLIMBER 1000

Reviews:

Related manuals for TREADCLIMBER 1000

Brands by name

Popular brands

Bowflex TREADCLIMBER 1000, Owner'S Manual

Search results

Summary of Contents for TREADCLIMBER 1000

Reviews:

Related manuals for TREADCLIMBER 1000

Brands by name

Popular brands