Bowflex SelectTech 5.1 Bench, Assembly & Owners Manual, Page: 5 / 16

5
Hardware and Tool Guide
Tools Required:
• 9/16” Socket
• 9/16” Wrench or Adjustable wrench
• 7/32” Hex Wrench (provided)
• 3/16” Hex Wrench (provided)
Before You Assemble
Before You Assemble
Please take the time to read all assembly instructions before
attempting to assemble your Bowflex
®
SelectTech
®
5 .1 Bench .
The best place for your Bowflex
®
SelectTech
®
5 .1 Bench is on a
hard, level surface .
Basic Assembly Principles
Here are a few basic tips that will make your assembly of the
Bowflex
®
SelectTech
®
5 .1 Bench quick and easy . By using these
principles, you can simplify each process and save yourself extra
time and effort .
1 . To make the assembly process go faster, gather the pieces
you need for each step and thoroughly read the assembly
instructions for that step prior to starting assembly for the
step .
2 . When tightening a locknut on a bolt, use a combination
wrench to grip the locknut and ensure that it is fastened
securely .
3 . When attaching two pieces, gently lift and look through the
bolt holes to help guide the bolt through the holes .
4 . As a general rule, and for all bolts and nuts on your Bowflex
®
SelectTech
®
5 .1 Bench, turn bolts or nuts toward the right
(clockwise) to tighten and left (counterclockwise) to loosen .
Descr: Button Head Hex Bolt - 3/8” x 3”
Qty: 2
Descr: Flat Washer 5/16”
Qty: 10
Descr: Lock Nut 3/8”
Qty: 2
Descr: Flat Washer 3/8”
Qty: 7
Descr: Button Head Hex Bolt - 5/16” x 2 .5”
Qty: 10
Descr: Button Head Hex Bolt - 3/8” x1”
Qty: 3
Descr: End Cap 3/4”
Qty: 2
Hardware:
NOTE: Illustrations not to scale.