background image

3

Safety Warning Labels and Serial Number

FCC Compliance

Changes or modifi cations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The machine and power supply comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this 

device must accept any interference received, including interference that may cause undesired operation.

Note:   This machine and power supply have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
 

•  Reorient or relocate the receiving antenna.

 

•  Increase the separation between the equipment and receiver.

 

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

•  Consult the dealer or an experienced radio/TV technician for help.

This product complies with the European Radio Equipment Directive 2014/53/EU

Product Specifi cation Label and Serial Number Label

(under Right Stabilizer Shroud)

WARNING! 

•  Injury or death is possible if caution is not used while using this machine.

•  Keep children and pets away.

•  Read and follow all warnings on this machine.

•  Refer to the Owner’s Manual for additional warnings and safety information.

•  The heart rate displayed is an approximation and should be used for reference 

only.

•  Not intended for use by anyone under 14 years of age.

•  The maximum user weight for this machine is 136 kg. (300 lbs)

•  This machine is for home use only.

•  Consult a physician prior to using any exercise equipment.

(

Label on machine is available in English and French Canadian only.)

Console Serial Number Label

Summary of Contents for MAX Trainer M9





















Reviews: