Bowflex ElitePlus Assembly Instructions Manual Download

Page: 19 / 94

A-17

Figure 26 - Squat Cables

Snap

Hook

Squat Bar

Snap

Hook

Step 24 - Route the Lat Cables

Locate the following items:

• Item #S - (2) Hand Grips
• Item #R - (1) Bent Lat Bar (optional)
• Item #Z - (2) Lat Cables with (2) Snap Hooks (attached)

Un-wrap the Lat Cables with Snap Hooks from both Pulleys on the

Lat Cross Bar. Pull one end of the Cables down from the Lat Cross

Bar, and fasten to the Chest Cable Snap Hook.

Fasten the attached Snap Hook from the Lat Cable to a Hand Grip

or the Bent Lat Bar. Repeat for remaining Lat Cable.

Step 25 - Route the Leg Cables

Locate the following items:

• Item #AA - Leg Cable
• From Step 14 - Leg Extension Seat Assembly

Un-wrap the Cables from the Rear Leg Pulley.

Pull one end of the “Y” Cable away from the Rear Leg to fasten to a

Snap Hook on the Rod Cable.

Note: For this step, make sure your Leg Extension Seat is installed.

Step 26 - Route the Squat Cables

Locate the following items:

• Item #R - Squat Bar

Un-wrap the Cables on each Base Leg Pulley. Pull one end of the

Cable up from the Leg Pulley, and fasten the Cable to a Snap Hook

on the Chest Bar.

Fasten the Snap Hook attached to the Squat Cables to the

corresponding Squat Bar “D” Ring.

Repeat for remaining Squat Cable.

CONGRATULATIONS! You have successfully completed
assembly of your BowFlex

Elite™ Plus

home gym! Please

inspect your machine to ensure that all fasteners are tight
and everything is properly assembled. Review all warnings
that are affixed to the machine.

Figure 25 - Leg Cables

Snap

Hook

Leg

Extension

Seat

Figure 24 - Lat Cables

Hand Grips

or Bent

Lat Bar

Snap

Hook

Snap

Hook

Assembly Guide

Summary of Contents for ElitePlus































































































Search results

Summary of Contents for ElitePlus

Reviews:

Related manuals for ElitePlus

Brands by name

Popular brands

Bowflex ElitePlus, Assembly Instructions Manual

Search results

Summary of Contents for ElitePlus

Reviews:

Related manuals for ElitePlus

Brands by name

Popular brands