background image

10

ENGLISH

If you get problems with uneven bass – certain bass 
notes are exaggerated more than others – then you 
probably have a room interface problem and it is worth 
experimenting with the location of the subwoofer. 
What may seem like small changes in position – 15cm 
(6in) or so – can have a profound effect on the sound. 
The use of multiple subwoofers can smooth the 
effects of room resonances, as each subwoofer will 
tend to excite resonances at different frequencies. If 
you appreciably alter the relative distances from the 
subwoofer(s) and satellite speakers to the listening 
position, re-assess the PHASE switch setting. You 
should also check the volume of the subwoofer (using 
either the processor output levels or the VOLUME 
control on the subwoofer amplifier as appropriate),  
but only after setting the phase correctly.

The cabinet surfaces will usually only require dusting.  
If you wish to use an aerosol or other cleaner, apply  
the cleaner onto the cloth, not directly onto the product 
and test a small area first, as some cleaning products 
may damage some of the surfaces. Avoid products 
that are abrasive, or contain acid, alkali or antibacterial 
agents. Marks on the paint surface may be removed 
with a dilute perfume-free soap solution. Remove any 
remaining streak marks by spraying with a proprietary 
glass cleaner and lightly wiping dry with a microfibre 
cloth. Do not use cleaning agents on the drive units 
and avoid touching them as damage may result.

6. Aftercare

Summary of Contents for ASW10CM S2











Reviews: