11
XMSR us
er guide
Operation
Oper
ation
10
XMSR us
er guide
Oper
ation
B
ow
ens
.co
.uk
B
ow
ens
.co
.uk
Operation
Groups
This function allows slaves operating on the same channel to be sub-divided into 8
independently adjustable groups while still being triggered together. A group may consist of
single or multiple slave devices. Group 9 transmits to ALL groups. Groups are changed as
follows:
Press &
hold
ENT
Alternatively, to adjust the group start at the main menu and press the key. The current
group setting is shown, use the and keys to select the required group.
Flash Test
Pressing the ENT key at any time (other than when in pairing or un-
pairing modes) test fires the flash on all paired devices on the same
channel.
Menu Reset
This option allows the user to jump back to the main menu screen on
the XMSR remote from any point within the menu system. To do this
simply press and hold the ENT button.
On receiving the confirmation signal from the slave, the remote will display “Pairing
Complete” indicating that pairing has been successful.
If the pairing session has not completed, or has been unsuccesful, the XMSR will time-out
after a period of approximately 15s and the message “Slave Not Found” will be displayed.
Repeat the pairing process again.
This process should be repeated for each of
your slave devices.
Additional devices can be paired at any time,
up to a maximum of 127 slaves.
Once teamed the slave device inherits the
group and channel of the remote.
Channels
The XMSR wireless network operates on 16 channels. For the remote to communicate with
the slave devices both must be on the same channel.
The channel is changed as follows:
Pairing Successful
Pairing Failed
Or
press &
hold
ENT
Starting at the main menu press the key, the channel sub-menu will be shown,
displaying the current channel. Select the required channel by pressing the and keys.
BWL0850_XMSR_user_guide.indd 12-13
14/11/2016 13:20