Bowell BX52, Operator'S Manual

Page: 24 / 59

www.etractorimplements.com
22
OPERATION
6. Mounting with a Quick Hitch.
a. Align the claws on the Quick Hitch slightly below the mounting pins on the chipper.
IMPORTANT
It may be necessary to add weight to the lower lift arms to bring them to the required height.
b. Back up until the pins are above the claws.
c. Use the turnbuckle on the top link to adjust the position of the top claw.
d. Raise the 3 point hitch until the pins seat in the claws.
e. Be sure the retainers are released to hold the pins in the claws.
7. Set the 3 point hitch in the non-sway position (see tractor manual for details).
8.
Install the PTO driveline:
NOTE
Be sure the telescoping portion of the shaft is greased and free of dirt.
a. Slide the collar back on the yoke, align the splines and slide the yoke on the tractor.
b. Release the collar and make sure the locking pin clicks into position.
NOTE
The driveline should already have been cut to the required length.
PTO SHAFT